Massoth eMotion M Locomotive Decoder

€41.43
Small 1,2Amps Locomotive Decoder (1 Motor) with 6 function outputs for switching light and other load also integrated RC servo control for small locos.
Manufacturer: Massoth
Availability: 1 in stock
SKU: me8154501
Manufacturer part number: 8154501

Available Options

Special instructions relating to this item.

Very small 1,2 Amp Locomotive Decoder with 6 function outputs, suitable for small locomotives with one motor

The eMOTION M Loco Decoder is the smallest unit of the G scale series decoders. This decoder is fully NMRA/DCC compatible. It is ideal for retrofitting to a 4-lead motor block in exceptionally small G-Scale locomotives as well as smaller gauges as H0 for example. Maximum load capacity 1 Amps. 5 function outputs available. The operation with an additional power buffer increases the dependability to a maximum. Brief track power interruptions will be bridged in analog and digital operation. Contaminated tracks and switch frogs will be passed without any speed changes or interruptions.

Features of the eMOTION M Loco Decoder:

  • Loco decoder for digital and analog operation
  • 14, 28 and 128 speed steps
  • 1,2Amps motor output
  • Output for a RC-Servo
  • Bus-Interface for MASSOTH and LGB® modules
  • Programmable driving curve
  • Start, mid and maximum speed adjustable (incl. lag times)
  • Serial and parallel data processing for all light and function outputs
  • Control of parallel updated modules (LGB®)
  • Digital and analog operation with automatic detection
  • Compatible with NMRA DCC and LGB® MTS (all generations)
  • Latest generation back-EMF (digital and analog)
  • Adjustable motor frequency (70Hz - 16 kHz)
  • 2 light outputs (front, rear) max.  0,3Amps each
  • 5 functions outputs (2 x 0,3Amps each , 2 x 50mAmps each and 1 x 10mAmps)
  • Dimmable light and function outputs, activatable in analog
  • Programmable flashing light function and short term function
  • Switching speed and lag times activatable with function key
  • Easy function mapping with direction assignment
  • All function outputs freely addressable (F1 to F16)
  • Terminals for power buffer for smooth and steady operation integrated (Item No.: 8151001 or 8151501)
  • Overload and thermal protection for motor and function outputs
  • Reset function for all CV-values
  • CV-reading
  • CV-writing
  • CV-writing bit-by-bit
  • CV indirect programming (by register programming for old digital sytems)
  • Direct register programming (CV 1 - CV4)
  • POM - Programming-on-Main (Programming on main track)

Customers who bought this item also bought