Close
Newsletter
Sign up for our newsletter:
Picture of Massoth LED Rear Light set

Massoth LED Rear Light set

LED Rear light set (4)
Manufacturer: Massoth

Four red LEDs preassembled with the required resistor and cable in order to equip a locomotive model (e.g. PIKO) with two rear lights on each side. Depending on the condition of the locomotive, the necessary number of LEDs are installed and connected to the decoder. The required resistor is already included in the cable to the LED so that connection to a function output with an output voltage of 5..22V is possible without problems and does not require special knowledge or programming.

SKU: me8129520
Manufacturer part number: 8129520
Availability: 2 in stock
€8.50
:
Customers who bought this item also bought

Pin Contact Plug

Plugs that are suitable for connecting to LGB motor blocks, decoder terminals and such.
From €0.20

Massoth Loudspeakers

Suitable for use with eMotion S, LS & XLS decoders.
From €8.00

Massoth eMotion Reed Contact PCB

Reed Contact PCB to trigger bell or horn.
1 in stock
€11.50